Principle Accountabilities:

o Performing Electrical, Mechanical and Life tests on products (Aircraft generators, starters, actuator motors and associated control electronics) using high speed drives in conjunction with electrical, electronic and mechanical equipment and analogue and digital instrumentation.
o Design of specific tests for specific customer criteria.
o Design and setting up of mechanical, pneumatic and hydraulic systems.
o Setting up of electrical wiring to specific impedance’s.
o Ability to fault find test equipment and test rigs.
o Ability to use and program Data Acquisition systems (Dewetron system in conjunction with Dasy Lab software)
o Writing of Technical documentation, including test procedures, Engineering Reports, Compliance Analysis, Equipment Specifications and Production Acceptance Test Specifications.
o Involvement in the design process, working with engineers from other disciplines including Design, Stress, Configuration, Materials etc.
o Ability to plan workload (using MS Project)
o Ability to lead (Work Package Owner) a small team of Engineers, coordinating activities and liaising with Project Managers and Lead Engineers and the customer.
o Perform data analysis of test results, assess trends to identify and help resolve generator performance issues. Ability to perform 6 sigma assessment for various test processes (advantageous).
o Provide Technical Development and Certification advice
o Ability to guide and train other engineers as required.
o Design test equipment and fixtures, create marked up drawings of critical dimensions/ functionality for acceptance checks after manufacture.
o Raise capital sanctions for high cost items including procurement specifications, financial and technical justification and acceptance test requirements.

Basic Qualifications :  o An electrical biased aerospace degree with some mechanical experience is desirable. Ratio is approximately. 70% electrical / 30% mechanical bias or equivalent.

o Must be self-sufficient and largely self-motivated.

o Ability to communicate clearly through written and verbal means to all levels of staff e.g. reports, interact with other Engineering teams.
o Ability to work under pressure to meet programme deadline
o Broad Development / certification knowledge and experience e.g. thorough understanding of all aspects of Development Engineering including Compliance Verification, Technical Risk, compilation of technical documentation, use of instrumentation
o Experienced in MS Excel, Flexpro, DasyLab.
o Basic knowledge of 3 stage generators, ac & dc starter motors, actuator motors. Experience of full aircraft electrical system would be an advantage.
o Good working knowledge of MS Software i.e. Excel, Word, Powerpoint, Project.
If you believe that you have the skills and experience for this role and are eligible to work unrestricted in the UK, please click apply now in order to submit your CV. Should your application be successful, you will be contacted within the next 7 days.

Tiro Associates Ltd is a specialist Employment Agency and Employment Business assisting with both contract and permanent opportunities in the automotive, aerospace, electronics, engineering and manufacturing sectors. For details of all our current vacancies please refer to tiroassociates.com

World renowned Aerospace industry specialist in Bedfordshire is looking to recruit a Lead Engineer – Airworthiness.  The successful Lead Engineer will be working for a company that specializes in the manufacturer of aircraft/aerospace passenger cabin interior products for the commercial and business jet aircraft markets.  This company has leading worldwide market shares in all of their major product lines and serve virtually all of the world’s airlines & aircraft manufacturers.

The appointed Lead Airworthiness Engineer will have an engineering degree or be educated to HNC standard and will have previously held Airworthiness Signatory Status.  The Lead Engineer will be responsible for supporting the Office of Airworthiness and delegated approval process and procedures for airworthiness activities for the design organization.  The successful Airworthiness Engineer will have technical and operational experience within the Aerospace industry, have a good understanding of Airworthiness regulations and certification for large aircraft, proven EASA Part 21 and CS25 capability with strong compliance and documentation skills and be able to demonstrate good leadership, motivational and leadership skills.
This is a fantastic opportunity for a Lead Engineer – Airworthiness to join a stable, fast-growing company that encourages professional advancement, fosters teamwork and rewards ingenuity.

Lead Engineer – Airworthiness – Responsibilities Include:
**Support the management and upkeep of the design office handbook
**Maintain process and procedures of the design organization, specifically the preparation and checking of compliance to Part 21
**Ensure capability and competence of external subcontractors inclusive of test facilities are current and be capable of conducting technical audits on behalf of the design organization
**Support the development and integration of Delegated Authority from Aircraft manufacturers’ design organizations
**Be prepared to act as an authorized on-site certification representative, on behalf of Airbus DOA
**Conduct airworthiness awareness training for colleagues, including an introduction to airworthiness and a refresher for employees with intermittent exposure to airworthiness requirements
**Build and maintain effective relationships with customers, partners, suppliers all sister sites
**Support the certification Director in the maintenance and control of the DOA Office of Airworthiness in general
**Function as a key contributor to the development and maintenance of the Business Centre of Excellence
**Any other reasonable duties as required

Other Information:
**Travel requirement – 20%-30% depending on business needs
**Hours of Work – Standard Staff Hours – 39 hours per week

Core hours Monday to Thursday, 09.00 to 16.30. Core hours Fridays, 09.00 to
12.30. Additional 7.5 flexible hours to be worked each week:
Monday to Wednesday between:
**07.30 to 09.00
**16.30 to 18.00
Thursday between:
**07.30 to 09.00
**16.30 to 19.00
Friday between:
**07.30 and 09.00
**12.30 and 14.00
If you believe that you have the skills and experience for this role and are eligible to work unrestricted in the UK, please click apply now in order to submit your CV. Should your application be successful, you will be contacted within the next 7 days.

Tiro Associates Ltd is a specialist Employment Agency and Employment Business assisting with both contract and permanent opportunities in the automotive, aerospace, electronics, engineering and manufacturing sectors. For details of all our current vacancies please refer to tiroassociates.com

B/E Aerospace Inc. is the w  Products for existing aircraft fleets – (the aftermarket) — generate approximately 50 percent of sales.  B/E Aerospace sells and supports its products through its own global direct sales and product support organization.
B/E Aerospace designs, develops and manufactures a broad range of products for both commercial aircraft and business jets. B/E Aerospace manufactured products include aircraft cabin seating, lighting, oxygen, and food and beverage preparation and storage equipment. The Company also provides cabin interior design, reconfiguration and passenger-to-freighter conversion services.

World renowned Aerospace industry specialist in Bedfordshire is looking to recruit a Quality Assurance, Environmental and Health & Safety Manager.   The sucessful Quality Assurance, Environmental and Health & Safety Manager will be working for the world’s largest manufacturer of aircraft interior products including Galleys and seating, with an installed base of over 1 million premium, business class and tourist class seats. At the Leighton Buzzard facility in the UK they provide a spares and aftermarket support for all of their seat and Galley models, manufacturing both newly designed and existing components.  You will have an HNC/HND or BSc in an appropriate engineering discipline, have EASA signatory status, experience of AS 9100, experience with Quality Management Systems and knowledge of CAA and FAA standards.  This role reports directly to VP & GM of Interior Structures and supports the Senior Management Team and Middle Management Team in the development and maintenance of all approvals and product quality standards whether digital or manufactured.

This company has leading worldwide market shares in all of their major product lines and serve virtually all of the world’s airlines & aircraft manufacturers so this is a fantastic opportunity for Quality Assurance, Environmental and Health & Safety Manager to join a stable, fast-growing company that encourages professional advancement, fosters teamwork and rewards ingenuity.  The role will involve about 25 – 50% world wide travel.

As the Manufacturing & Design Quality Assurance, Environmental and Health & Safety Manager your responsibilities include:
**Responsibility for implementation of best practice policies and procedures including H&S and Environmental
**Maintenance of quality standards, systems and procedures and ensuring compliance
**The maintenance EASA Pt 21 Sub part G and AS 9100 quality approvals, ensuring compliance
**Support of EASA Pt 21 Sub part J
**The introduction of internal audit procedures, ensuring compliance to them
**The management of external audits
**The improvement of the quality management procedures through the analysis of performance and data following through with the implementation of identified actions
**Reviewing customer requirements and ensuring that they are met including following up on customer returns and permanent corrective actions
**Working with purchasing staff to establish quality requirements from external suppliers and ensuring that these are fully adhered to by the suppliers
**Ensure that manufacturing, supply chain and design/certification processes meet the required standards
**Maintain the Business Continuity Plan ensuring that it is thorough robust and tested
**Ensure that internal quality standards are achieved, identifying issues and swiftly resolving these through improvement processes (e.g 8D)
**Ensure that the training plans across the business support the quality expectations
**Setting up and maintaining controls and documentation procedures
**Monitoring performance by gathering relevant data and producing statistical reports;

Health & Safety
**Making changes to working practices that are safe and comply with legislation
**Preparing health and safety strategies and developing internal policy
**Carrying out risk assessments and considering how risks could be reduced
**Outlining safe operational procedures which identify and take account of all relevant hazards
**Carrying out regular site inspections to check policies and procedures are being properly implemented
**Leading in-house training with managers and employees about health and safety issues and risks
**Maintaining records of inspections findings and producing reports that suggest improvements
**Keeping records of incidents and accidents and producing statistics for managers;
**Keeping up to date with new legislation and maintaining a working knowledge of all HSE legislation and any developments that affect the A/C industry
**Producing management reports, newsletters and bulletins
**Advising on a range of specialist areas, e.g. fire regulations, hazardous substances, noise, safeguarding machinery and occupational diseases

The Ideal Candidate:
**HNC/HND or BSc in an appropriate engineering discipline
**EASA signatory status
**Experience of AS 9100
**Experience with Quality Management Systems
**Auditor training and qualification advantageous
**Knowledge of CAA and FAA standards, approvals and procedures including certification, material requirements and engineering standards
**Working knowledge of the company’s products or similar
**Working Knowledge of IOSH and HSE regulations and practices
**Working knowledge of the ISO 9000 and AS 9100 standards
**High standard of written and spoken communication skills in order to explain Quality and health & safety processes to a wide range of people and to give presentations to groups
**Negotiating skills, to convince managers of the need to implement and maintain both quality and safety standards that may compromise speed or efficiency in the organisation
**Diplomacy – QA and H&S requires a collaborative approach; the ability to understand and analyse complex information and present it simply and accurately
**Investigative mind; attention to detail; an interest in the law and the ability to understand regulations.

If you believe that you have the right experience for this role and are eligible to work in the UK please click apply now in order to submit your CV.

Senior Specialist Engineer – FPGA Design with Control Systems. Working within a flexible design environment this role will commence by being responsible for specification, design, verification, certification and maintenance of new and existing FPGA designs within the client range of products  This may involve aspects of control system design / evaluation for FPGA implementation in motor control applications.  To perform peer review of code, verification and deliverables, and to promote the effective application of FPGA / ASIC technologies, tools and processes.

The successful candidate will be expected to keep abreast of technological developments within the electronics field and to understand the overall function of the product and its role in the aircraft’s electrical power generation system.

Principle Accountabilities:
To be responsible for FPGA design in  products from concept to the achievement of specification compliance and DO-254 certification in line with applicable processes. To achieve efficient co-working with engineers . To contribute to concept definition, evaluation, specification and interface design of FPGAs, identifying efficient solutions. Estimate realistic schedules for FPGA workpackage tasks. Perform VHDL code design to applicable processes and standard, maintaining compliance with specification and traceability.  Participate in control system design / evaluation for FPGA implementation in motor control applications as required.  Perform simulation test design to applicable processes/ standard to demonstrate compliance to specification (includes definition of verification requirements and report). Support system/product development changes with FPGA revisions under the required standard of configuration management. Prepare and maintain the necessary documentation and pass reviews needed for DO-254 certification and production release.  Act as independent reviewer of deliverables produced by others (specification, code, firmware release, testbench, verification plan and report). Understand the unit/ system application of FPGAs as appropriate, and to collaborate with the hardware and systems groups to produce working systems and to meet overall project requirements (cost, timescale, weight, reliability, and maintainability criteria). Understand existing FPGAs/ ASICs as needed to provide effective design maintenance as required.  Contribute to FPGA team improvement of FPGA design processes and tools. Follow GPS operating procedures and participate in engineering improvement activities aimed at increasing efficiency and quality of work.

Basic Qualifications :

1. Strong demonstrable experience of FPGA design (preferably VHDL) and verification by simulation with good knowledge of the following software tools: VHDL simulators (e.g. Modelsim), synthesis tools (e.g. Synplicity), FPGA design fitting tools (e.g. Actel Designer Series, Xilinx or Altera alternative).
2. Demonstrable experience of control system design and analysis for implementation in FPGAs. This may include control requirements specification, knowledge of control topologies / techniques, control system simulation using tools such as Matlab/ Simulink or SABER, algorithm evaluation from an FPGA implementation and control performance viewpoint, understanding of implementation of data paths, DSP and VLSI maths functions in FPGA designs.
3. An appropriate track record of design in FPGA design (e.g. a number of designs including a variety of applications and a variety of functional types) and in control systems design.
4. A good level of expertise in general electronics and digital design commensurate with the position of a senior specialist design engineer.
5. A proactive style, team spirit, high energy level, and positive outlook.
6. Commitment to deliver with diligence appropriate to high product safety / integrity needs.
7. Good written and verbal communication skills.
8. Good problem-solving skills and initiative.
9. Good coordination and mentoring skills.

Desirable Attributes:

1. Application of the FPGA and /or control systems design skills as defined in essential requirements in the areas of electrical motor control.
2. Knowledge of power electronics and motor control algorithms, technologies and techniques.
3. Familiarity with RTCA/DO-254
4. Experience with specification management tools (DOORs) or code management tools.
5. Formal qualifications/training in microelectronics or other relevant areas.
6. Experience in military or aerospace electronics design/ development.
This is an exciting opportunity for a Senior Specialist Engineer to join this leading global aerospace company

A world renowned Aerospace industry specialist in Bedfordshire is looking to recruit a Programme Scheduler The successful Programme Scheduler will be working for a company that specializes in the manufacturer of aircraft/aerospace passenger cabin interior products for the commercial and business jet aircraft markets.  This company has leading worldwide market shares in all of their major product lines and serve virtually all of the world’s airlines & aircraft manufacturers. This is a fantastic opportunity for a Programme Scheduler to join a stable, fast-growing company that encourages professional advancement, fosters teamwork and rewards ingenuity. Our client is looking for a candidate capable of developing into a Project Manager.

As the Programme Scheduler you will perform a key role in a large programme which involves new product introduction and the setting up of a new facility in the low cost environment. You will be responsible for developing, maintaining and updating all the different project plans in Primavera. Earned value reporting is key to ensure that everybody is on track and within budget.

Responsibilities of a Programme Scheduler / Planner include:
*Develop and maintain all project plans in Primavera
*Send out specific weekly task sheets to the team to ensure everybody is aware of their tasks
*Ensure all interdependencies are included in the plans
*Monthly reporting of Earned Value
*Maintain the Primavera system in line with the Corporate Standards
*Develop the Primavera functionality to support Programme Processes
*Put resource budgets against all activities
*Plan all test facility capacity in Primavera
*Take TeamCenter data (hours and % completion data) and manually input into Primavera
*Set up all reporting templates
*Train all users for data input and report generation
*Write a user manual for A350XWB Primavera activities

The ideal candidate:
*Proven experience of working in a programme-based environment, working with Primavera (Expertise with Primavera P6)
*Proven experience of working with different functions to produce interlinked plans
*Proven experience of producing progress reporting
*Ability to work with different types of people & functions to achieve the goal
*Self-motivated and high initiative
*Thorough, methodical & attention to detail

The successful candidate will benefit from a generous basic salary, pension, life assurance and 25 days holiday (plus 8 stat days)

n.b. To apply for this role you must be able to live and work unrestricted in the UK. Should your application be successful, you will be contacted within the next 7 days.

Tiro Associates Ltd is a specialist Employment Agency and Employment Business assisting with both contract and permanent opportunities in the automotive, aerospace, electronics, engineering and manufacturing sectors. For details of all our current vacancies please refer to tiroassociates.com

World renowned Aerospace industry specialist in Bedfordshire is looking to recruit a Strategic Buyer.  The successful Strategic Buyer will be responsible for leading the key phases of both strategic and tactical supply chain activity at a commodity level.  This may include supplier selection, audit, contract negotiation, implementation and support of production and test build phases.  This role reports directly to the Supply Chain Manager.  The suitable applicant will have CIPS, Post Graduate Diploma or equivalent and will have proven experience in a Materials Management or similar environment.

You will be working for a company that specializes in the manufacturer of aircraft/aerospace passenger cabin interior products for the commercial and business jet aircraft markets. They have leading worldwide market shares in all of their major product lines and serve virtually all of the world’s airlines & aircraft manufacturers.  This is a fantastic opportunity for Strategic Buyer to join a stable, fast-growing company that encourages professional advancement, fosters teamwork and rewards ingenuity

The Key Responsibilities of the Strategic Buyer include:
**Identify potential suppliers for the Structures Business who may be able to offer new, innovative products in accordance with programme objectives
**Evaluate potential suppliers through an audit process
**Working with the potential suppliers and the programme team, identify opportunities to reduce weight and cost, and address quality issues.
**Maintain a minimal selection of suppliers with whom B/E can adopt a true “partnership sourcing” approach to minimise cost and increase profit throughout the supply chain.
**With Supply Chain Manager and Company Lawyer, create and maintain appropriate supply agreements, leading the negotiation phase.
**Lead contract implementation with suppliers ensuring a Supply Chain FMEA is completed to assess and mitigate risks
**On a timely basis, lead the procurement, change management, sample validation and receipt of components to meet programme timing, commercial and quality objectives.
**Monitoring and reporting supplier performance to compliment objectives on delivery and inventory.
**Ensuring that new parts have all necessary supplier, commodity and cost data established on JDE
**Ensure conformance to departmental procedures in all activities
**Work in conjunction with engineering to achieve BOM cost targets for product designs
**Supplier selection and contract implementation
**Support production requirements on a timely basis
**Any other reasonable duties as required

You will be dealing with the Engineering & Certification team, the Programme Management team, Manufacturing, Stores & Shipping, Finance and suppliers.

Education Requirements / Technical Skills / Competencies Required:
**O Level / GCSE
**A Level (desirable)
** CIPS, Post Graduate Diploma or equivalent
**Proven track record of achievement in a relevant position
** proven experience in a Materials Management or similar environment.
**Enthusiasm and “will to win”
**Flexible and willing to work as part of a team
**Excellent written and oral communication skills
**MS Office skills

If you believe that you have the skills and experience for this role and are eligible to work unrestricted in the UK, please click apply now in order to submit your CV. Should your application be successful, you will be contacted within the next 7 days.

Tiro Associates Ltd is a specialist Employment Agency and Employment Business assisting with both contract and permanent opportunities in the automotive, aerospace, electronics, engineering and manufacturing sectors. For details of all our current vacancies please refer to tiroassociates.com

As Quality Director for this leading global aerospace company you will lead and direct the quality function within the Motor Drives Systems ValueStream leading improvement in  New Product Introduction (NPI) processes and managing the Quality Management System to ensure the highest quality products reaches  customers.

The MDS ValueStream is evolving, working with innovative technologies and designing new products through production and into service. The Quality Director will play a pivotal role in leading initiatives to develop, implement and improve the QMS throughout the ValueStream.

Travel to other ECEPS and GAS Facilities in the UK and US will be required from time to time, as well as other ad hoc travel to support business needs.

Principal Accountabilities:
“ Develop and execute the Quality Strategy for the Motor Drives Systems ValueStream
“ Champion a Perfect Quality culture and make decisions that always protect the safety of products and services
“ Drives the development of robust processes used by the business to control all aspects of quality within an NPI environment
“ Champions continuous improvement activities to remove waste and variance
“ Acts as the primary interface with customers and regulatory agencies with respect to quality
“ Ensures compliance with Customer requirements, Product Introduction Processes, Quality Systems and any regulatory requirements including AS9100 and EASA Part 21J
“ Lead the drive for quality improvement and business excellence in all areas
“ Ensure the robust resolution of quality issues and implementation of effective corrective and preventive action
“ Quality interface with Value Stream customers

Basic Qualifications:
“ Proven Operational/Quality Leadership experience required with evidence of increasing responsibility and exposure to New Product Development preferred within an aerospace or automotive environment
“ A formal qualification in Electronics or Electrical Engineering or equivalent
“ Relevant Quality experience gained within an Engineering or Manufacturing Environment, bias towards Electronics, and proven knowledge of Quality processes
“ Fully conversant with AS9100, ISO 9000, Airworthiness and Aerospace regulatory requirements and preferably, to have completed an IQA recognised audit course
“ Demonstrated problem solving skills
“ Flexible to work within an evolving team with changing requirements and within a matrix organisation
“ Computer literate with effective written and verbal communication skills

If you believe that you have the skills and experience for this role and are eligible to work unrestricted in the UK, please click apply now in order to submit your CV. Should your application be successful, you will be contacted within the next 7 days.

Tiro Associates Ltd is a specialist Employment Agency and Employment Business assisting with both contract and permanent opportunities in the automotive, aerospace, electronics, engineering and manufacturing sectors. For details of all our current vacancies please refer to tiroassociates.com

As a Cost Estimator you will working for a company that specializes in the manufacturer of aircraft/aerospace passenger cabin interior products for the commercial and business jet aircraft markets. The company has leading worldwide market shares in all of their major product lines and serve virtually all of the world’s airlines & aircraft manufacturers.  This is a fantastic opportunity for a Cost Estimator to join a stable, fast-growing company that encourages professional advancement, fosters teamwork and rewards ingenuity

The Key Responsibilities of the Cost Estimator include:
**Set up BoMs and routings on JDE incorporating the latest knowledge of current machines, technology, set-up and run processes and timings
**Estimating parts with appropriate challenge & feedback to internal stakeholders in a timely manner to meet end customer requirements
**Working to tight and aggressive deadlines in a dynamic cost estimating environment
**Continuous improvement of the cost estimating process: it is expected that improvement opportunities will be communicated to the costing team and manager, and implemented wherever possible
**A determined and pro-active approach to collecting cost data
**Regular review and maintenance of standard costs, in particular aiming to achieve the most competitive cost and price

Knowledge / Experience
**Strong knowledge of manufacturing, preferably within Aerospace
**Relevant cost estimating experience either specialising in manufactured parts, purchased parts or ideally both
**Solid background in machined components
**Experience within a continuous improvement/lean culture
**Experience working with External Vendors

Technical Skills / Competencies
**Using Integrated systems and MRP/ERPs
**Strong Excel and Database desired
**Communication skills – ability to communicate at all levels from Operations to Management
**Ability to question, challenge and make decisions based on data and facts
**A positive “can do” attitude
**Working within a team to achieve departmental and business objectives

If you believe that you have the skills and experience for this role and are eligible to work unrestricted in the UK, please click apply now in order to submit your CV. Should your application be successful, you will be contacted within the next 7 days.

Tiro Associates Ltd is a specialist Employment Agency and Employment Business assisting with both contract and permanent opportunities in the automotive, aerospace, electronics, engineering and manufacturing sectors. For details of all our current vacancies please refer to tiroassociates.com

As the Senior Process Engineer you will be working with selected vendors on the development, planning, implementation and validation of robust manufacturing processes, systems and the equipment required for production of aircraft interior structures.  You will work with selected strategic partners and suppliers to develop, define and deliver manufacturing and business processes.  You will also be supporting the Production and Certification with the build of pre-production and development test structures

The Key Responsibilities of the Senior Process Engineer include:
**Ensure processes are developed to produce product that meets internal and external customer requirements.
**Ensure all new processes meet volume, quality, cost and delivery targets.
**Ensure the design of production processes and facility layouts to optimise ‘Value Added’ activities and eliminate ‘Non Value Added’ processes and operations.
**Ensure equipment suppliers and ‘Turnkey Vendors’ provide all contractual deliverables on time and to budget.
**Ensure all inputs required by the suppliers and ‘Turnkey Vendors’ are delivered in line with the execution plan.
**Ensure robust validation, verification and rate readiness sign-off of all new production processes.
**Provide accurate weekly reporting, detailing progress to plan, open issues, up coming actions and risk management.
**Identification, specification and presentation of business cases for new equipment and processes.
**Implementation, education and support of the ‘standard work’ production approach and other lean tools and initiatives in-line with the companies CI strategy.
**Support the implementation of training procedures and training programs to ensure effective use of all new processes and equipment.
**Any other reasonable duties as required.
This role reports directly to A350 Process Development Manager for the Structures Business and has no direct reports.

The Ideal Senior Process Engineer will have a strong background encompassed within the following areas:
**Managing suppliers and ‘Turnkey Vendors’ of high value capital equipment.
**Experience of delivering high value capital projects on time and to cost
**Introduction of new products into new manufacturing processes including rate readiness validation and sign-off.
**Specification and implementation of lean manufacturing processes utilising world class best practices.
**Experience of automated and semi-automated equipment, processes and related controls.
**Integration of new manufacturing processes into PLM and MRP business systems.
**Implementation of processes into manufacturing execution systems.

Technical Skills / Competencies
**Robust, technical approach to supplier management.
**Continuous Improvement and 5S Mindset.
**Competence in lean manufacturing processes, systems and associated tools.
**Data driven, methodical approach to evidence based decision making.
**Practical problem solving methodologies.
**Able to read, understand and interpret engineering information.
**Effective communicator at all levels both verbal and written.
**IT literate – Effective use of Microsoft Office software; Excel, Word, PowerPoint, Visio, Access.
**Be able to work on their own initiative.

If you believe that you have the skills and experience for this role and are eligible to work unrestricted in the UK, please click apply now in order to submit your CV. Should your application be successful, you will be contacted within the next 7 days.

This is an exciting opportunity for a Senior Specialist Engineer to join this leading global aerospace company that design systems for aircraft of the future, providing actuator drive and power control electronics that help customers surpass the performance standards of the best aircraft flying today.   As a result of more new design wins our client is seeking to further expand its electronics hardware design team.
We are seeking experienced engineers to execute detailed design of high performance analogue and digital hardware, typically working in teams of two to five hardware engineers within a total team of up to 50 engineers.  The teams are responsible for carrying out all the tasks required to deliver a system or subsystem on time and to the required quality standards.  Engineers will bring good knowledge of modern SMT electronic components, an understanding of when custom components can be incorporated with advantage, and the ability to deploy appropriate software analysis tools as required Our teams also need to bring to bear sound EMC design skills and a good appreciation of the factors that need to be managed to deliver the size, weight and reliability goals our customers set.  Engineers will deliver the documentation for professional or military systems that give customers and airworthiness authorities  appropriate assurance that the design has been professionally executed and proven.
We expect our engineers to deploy tenacity, perseverance and sound problem solving abilities, together with a willingness to learn and use new techniques.
The senior engineering people assist project managers with estimating work and ensure they follow through on programmes and ensure timely completion.
You should be prepared to share your expertise and help les experienced staff develop their skills.
You can expect a dynamic environment, where process improvement is a way of life, and we constantly strive to do our work better than before, but also ensure that we take care of our people when a supportive employer is most valued.
Basic Qualifications: Candidates will bring o Strong Hardware Electronic Engineering skills o A degree level or HND qualification in Engineering or equivalent experience o A proactive style, team spirit, high energy level, and positive outlook.
o Demonstrable Time Management skills
o Ability to multi task and cope with a degree of pressure in a professional product development environment One or more of the following will also be valued:- o Work experience in a similar or related industry o Knowledge of or experience with one or more of software tools: PSPICE (circuit simulation), Saber (circuit simulation), Mathcad, Simulink, Matlab.
o An understanding of electrical generator and brushless DC motor drive operation.
o Understanding of design for EMC.
o Knowledge of DO254 or related standards.

If you believe that you have the skills and experience for this role and are eligible to work unrestricted in the UK, please click apply now in order to submit your CV. Should your application be successful, you will be contacted within the next 7 days.

Tiro Associates Ltd is a specialist Employment Agency and Employment Business assisting with both contract and permanent opportunities in the automotive, aerospace, electronics, engineering and manufacturing sectors. For details of all our current vacancies please refer to tiroassociates.com